Recent Posts

Posts Tagged ‘post’

postheadericon A look at some of the mountain bike parts available

A Look at Some of the Mountain Bike Parts Available

One may have never thought about the parts that are required to make a mountain bike while riding it. But sometimes it becomes important to know the parts. You never know where they will help you. Some of the mountain bike parts are:

The Bottom bracket which is an attachment of the crank set to body of the bike. It can be replaced or adjusted.

The Brake cable: it is a cable that is used to attach the brake lever to the mechanism.

Brake lever: It is a handlebar lever used for activation of the brakes. The brake on th left side is for the front and the one on the right is the rear brake.

The bike consists of a chain circular set of links which transfers the power from the chain ring to moving parts of the wheel.

Chain ring: these are toothed rings which are attached to the crank that holds the chain and are important mountain bike parts.

Crank Lever: it extends from the bottom bracket to the pedal of the bike and transfers the power to the chain rings and is one of the mountain bike parts.

Derailleur Mechanism is required for moving the chain from one part to another.

The down tube Section of frame extends downward from the stem to the bottom of the bracket.

Dropout cut slots are provided at the bottom of front fork. They are designed to allow the axle of the wheel.

Front Shock absorbers are provided on the front fork.

Handlebar: a horizontal bar is fixed to the stems which have hand grips at its end and the brake levers and shifters are attached to it.

Headset Mechanism is in the front of frame which connects the front fork to the stem and also the handlebars.

The spokes are attached to the Hub Center section of the wheel.

The end of the spoke in the rim is held by a nipple threaded receptacle.

Rear Shock absorbers are provided on the rear tire in most of the dual-suspension bikes which is another of the important mountain bike parts.

Rim: it is a metal ring with a U-shaped cross section which connects the spokes to the tire which is on the outside.

A Saddle Seat is the part one should not sit on when riding steep downhill.

A Seat post supports the post for the saddle. It is mounted into the seat tube with a mechanism for changing its height.

Skewer Metal rod: it goes all the way through the core or the hub.

The crank arms are attached to a spindle freely rotating axle. It is a part of the bottom bracket.

There are thick wires which join the hub to the rim. The tension in it is adjusted by means of a nipple available on the rim side.

Tire: they are on the outer part of the rim. They make contact with the road while riding and also provide a grip.

The Top tube is present in the top bar of the bicycle frame.

The spikes are attaches to the wheel hub Center of the wheel.

The steering tube is attached to the handlebar by means of a stem piece.

postheadericon Accessories for table tennis

Accessories for Table Tennis

You’re looking for clips table tennis? The Internet is a great source of online stores where you can buy International Table Tennis Federation approved table tennis products and accessories. You can find on the Internet a variety of clips such as the Clipper Stiga Net and Post Set which packages quality nets table tennis and posts.

Another large group is the Dunlop Easyclip Table Tennis Post Net and Ensemble. This game is a set of easy mounting and can be quickly put in place on the table. There are many mowers, and net fixed that easy to assemble characteristics that make them absolutely perfect for sites like schools, sports centres and clubs table tennis.

Other brands include DONIC clips, TIBHAR, Joola, EDS, TMS and Andro. Most of these brand names provide other equipment table tennis apart from the nets, clips and messages. Joola, for example, have Anti-Topspin, Antispin Long Pips, Antispin Soft paddles.

Like what was mentioned above, you can find almost anything online. Sport shops online offer great savings and give you a wide choice of brands. Just browse through catalogues of products from different online stores and chances are you’ll get what you need.

Apart from the table tennis clips and nets is that the tables are regulation size. The ITTF sets the standard for a table to the dimensions of 274 cm x 152.5 cm x 76 cm high. The playground also set to an area 14m long and 7 meters wide and 5m high.

The ITTF believes it is restrictive to allow players to play in an area less than that. The area is too small and players will not be able to move freely. The tables are either painted green or dark blue, some paintings are painted in black.

The standard of tennis balls table only weigh a mere 2.7 gram. The 40 mm diameter ball is essentially hollow. Initially, the size of the ball was 38 mm in diameter. The standard size balloon was amended to the 2003 World Championship Table Tennis.

The regulation size of tennis balls table consists of a high-bouncing ball hollow celluloid. The color of bullets is either white or orange depending on the colour of the table.

Pales or snowshoes are about 10 cm long. Palettes have a thin layer of rubber and a kind of sponge between the two players who can give the ball enough speed and spin. Both sides of the racket have the layer or rubber and sponge. Table Tennis manufacturers have created different types of rubber that will help maximize athletes play capabilities.

The right combination of materials improves the performance of play. Besides rubber, manufacturers are now using materials like Kevlar, arylate, titanium, aluminum and aramid.

Another equally important aspect of table tennis equipment and accessory is the influence of the shoe. Grip is important, too, if you drag the player is in danger of sliding all the way, if the handle is too player’s movement is severely restricted.

Sometimes, however, the floor is too slippery or too rough. That is why some athletes, serious, it seems, have several pairs of shoes to help compensate for different soil conditions.

It would be preferable to obtain specific information on product reviews to ensure that whatever you buy is the thing you really need.

postheadericon A look at the numerous models of haro bmx bikes available

A Look at the Numerous Models of Haro Bmx Bikes Available

Haro BMX bikes are designed specially to be lighter and stronger. There are numerous models available here. Forum, Back trail etc are some of the main divisions of Haro BMX bikes.

Forum Bikes: Forum Pro has 100% Chromoly frame and it has stiffer legs. It is designed to be less weight. Pivotal technology is used to design the seats. The colors available are white and coffee fade.

Forum counterpart is another model of Haro BMX bikes and it has also 100% chromoly frame set. It has 36 h Sun Rhyno lite rims. The fork is designed thread less and it has alloy pedals and steel pegs.

Forum Intro has tube chromoly frame and it has 100% chromoly forks and handle bars. The colors available are brick red, brown fade, trophy blue and black.

Forum partial20 inch, 18 inch and 16 inch BMX bikes are available with Chromoly down and steer tube.

Forum Lite bikes: Forum Pro-lite bikes from Haro BMX bikes have 21-inch TT chromoly frame set. They use odyssey Aitkin tires. The pivotal technology used provides comfortable seating system.

Forum counter part lite BMX bikes have odyssey Aitkin tires and Odyssey team grip. The colors available are black, orange and grey fork.

Forum Intro lite has alloy sealed bearing hub sets. They come in gloss black/ sea foam and sea foam/Grey.

X series Haro BMX bikes: There are 5 X series bikes here. Back trail X3 has alloy cassette hub sets. The alloy sprocket comes with machined teeth. They come in pearl white, gloss black and bright green colors.

X2 bikes are suitable for dirt, park and street traction. It has chromoly tube frame and steer tube fork. It has alloy hubs and Tektro brakes. Blue, black and orange are the colors available for this model.

X1 bikes have alloy rims and chromoly down tube. The alloy pedals grant more grips in all surfaces. The seat is designed with steel post.

X0 bikes have back trail design frame. Odyssey free wheel and Haro Catapult tires are the key features of this model.

F series BMX bikes: There are 8 models in F series Haro BMX bikes. They are specially designed for free flow and style. F4 model has alloy sprocket with machined teeth. It also has double walled rims and alloy hubs.

F3 is designed with 3 + tube chromoly. It has 14 mm chromoly axles. It has 100% chromoly fork. F2 is designed with chromoly down tube. It has tektra brakes. F1 is designed with new frame design. It has Haro MS 4 tires. F1c has 2 sets of pegs. It has front and rear brakes. It is more suitable for free style riding.

F24, F18 and F 16 bikes have 24 inch, 18 inch and 16 inch whelks respectively. They have front and rear brakes and 2 sets of pegs. The main line free wheel is used here.

Z series Haro bikes: Z1 haro BMX bikes have medium profile frame and they use small block resin pedals. It has V type brakes. Z16 CB only bikes are designed with low profile frame and junior resin pedals. It has soft krayton rubber grips. Z 12 CB only is designed with junior pedals and low profile frame.

The haro BMX bikes are available in online stores and you can also get from authorized dealers in your nearby locality also. They are reliable and offer thrill and fun to the rider.